In short

A fix-and-flip loan calculator estimates three separate numbers: lender financing, investor cash required before and during the project, and profit at sale. Enter the purchase price, rehab budget, ARV, loan terms, holding costs, and selling costs, then test a longer timeline or lower sale price before committing to the deal.

Table of contents

A fix-and-flip calculator is only useful when it separates the deal's timing from its total cost. A lender may approve a loan amount that looks sufficient, while the investor still needs cash for the purchase gap, points, closing costs, early work, and monthly carrying costs.

How does a fix-and-flip loan calculator show the cash you need?

A renovation house, loan funds, and investor cash shown as separate parts of a flip budget
A loan commitment is not the same as cash available at closing or throughout the rehabilitation period.

A useful fix-and-flip loan calculator calculates both total project economics and the cash the investor must supply before sale. Those are different numbers because loan proceeds may be limited by purchase price, total cost, ARV, draw timing, or the lender's fee structure.

Start with three outputs:

  1. Maximum loan commitment: The most the lender could fund under the quoted structure.
  2. Cash required at closing: The purchase shortfall plus points, closing costs, and any lender-required reserves due before the deal closes.
  3. Total cash exposure: Cash required at closing plus any interest, holding costs, rehabilitation advances, and contingency the loan does not cover before the property sells.

The basic profit model is:

Projected profit = sale price − purchase price − rehab − financing costs − holding costs − selling costs

The cash-to-close model is narrower:

Cash at closing = purchase gap + points + lender fees + buyer closing costs + required reserves

Do not treat the approved rehab budget as cash already in the bank. If rehabilitation funds are released through draws, the contractor payment may come first and the reimbursement later. Thorne CRE's construction-loan guide describes staged draws tied to completed work and notes that interest can apply to funds actually disbursed rather than the full commitment. (thornecre.com)

A flip calculator should answer, "Can the deal make money?" and "Can the investor carry the deal until it makes money?"

Which inputs belong in a fix-and-flip loan calculator?

Organized worksheet showing purchase, rehab, financing, timeline, and sale inputs for a house flip
A complete model combines acquisition, rehabilitation, financing, time, and exit assumptions.

A complete calculator needs property, construction, financing, timeline, and exit inputs. Leaving out even one major category can make a thin-margin deal appear safer than it is.

Use these inputs before relying on a result:

Input group What to enter Why it matters
Acquisition Contract price, earnest money, buyer closing costs Establishes the purchase cash requirement and purchase financing gap.
Rehabilitation Itemized scope, contingency, draw schedule Determines total cost and when cash must be spent.
Value and exit ARV, expected sale price, selling costs Sets the revenue side of the project and tests the exit.
Loan terms Maximum loan, rate, points, lender fees, repayment structure Captures the cost and availability of financing.
Time Expected closing date, rehab duration, sale period, extension assumption Converts the annual rate and monthly carrying costs into actual dollars.
Holding costs Taxes, insurance, utilities, HOA dues, maintenance, security Shows the cost of owning the property before sale.

Separate the rehab budget from the rehab cash-flow schedule. A $75,000 renovation does not necessarily mean $75,000 is needed on day one, but it also does not mean the lender will advance every dollar before work begins.

If the property needs fast acquisition capital and renovation funding, compare the structure carefully with short-term bridge financing. The exit should be clear before the loan closes, whether that exit is a sale or refinancing after the property is stabilized.

A good calculator treats the timeline as a cost driver, not a footnote.

How do you calculate financing costs and projected profit?

Calculate points, interest, lender fees, and holding costs as separate lines, then deduct each from expected sale proceeds. A simple worked example makes it easier to see why a deal that looks profitable before financing can become marginal after the full carry is included.

Assume the following illustrative scenario, not a lender quote or market-rate assumption:

Step 1: Calculate the purchase gap

At 85% financing on a $250,000 purchase, the loan contributes $212,500 to the purchase. The investor's purchase gap is therefore $37,500.

Step 2: Calculate points and interest carry

Points are $5,750 in this model: $287,500 multiplied by 2%.

Interest carry is $15,000: $250,000 average drawn balance multiplied by 12%, multiplied by 6 divided by 12. This assumes interest-only payments and a steady average outstanding balance. A real draw schedule can produce a different result.

Step 3: Add holding and selling costs

Six months of holding costs equal $7,200. Selling costs equal $32,000, or 8% of the assumed $400,000 sale price.

Step 4: Calculate the projected profit

Cost or revenue item Amount
Expected sale price $400,000
Purchase price ($250,000)
Rehab budget ($75,000)
Points ($5,750)
Interest carry ($15,000)
Buyer closing costs ($4,000)
Holding costs ($7,200)
Selling costs ($32,000)
Projected profit $11,050

Under these assumptions, total project cost is $388,950 and projected profit is $11,050. The cash required at closing is at least $47,250: the $37,500 purchase gap, $5,750 in points, and $4,000 in buyer closing costs. That figure does not remove the need for a reserve for draw timing, interest payments, holding costs, or unplanned work.

For a broader explanation of staged renovation funding, review this guide to construction loan basics and draw schedules.

Projected profit is not available cash until sale proceeds close and every loan payoff, fee, and cost is paid.

How should you stress-test a flip before making an offer?

Stress-test the hold period and sale price before treating a projected profit as dependable. The downside case matters most when the initial margin is modest, because each extra month adds interest and holding costs without adding sale proceeds.

The table below keeps every assumption from the illustrative example except the hold period. It assumes $2,500 of monthly interest on the average drawn balance and $1,200 of monthly holding costs.

Hold period Interest carry Holding costs Total project cost Projected profit at $400,000 sale
4 months $10,000 $4,800 $381,550 $18,450
6 months $15,000 $7,200 $388,950 $11,050
8 months $20,000 $9,600 $396,350 $3,650

At the six-month timeline, a sale price of $380,000 instead of $400,000 would turn the illustrated $11,050 profit into an $8,950 loss before income taxes. That is why the calculator should include at least one lower-sale-price case and one longer-hold case.

Some investors plan to refinance rather than sell. That is a different exit model because rental income, valuation, and long-term debt service matter. Review DSCR financing for income-producing properties separately instead of assuming a sale-focused flip calculator answers a rental decision.

Before making an offer, request a deal-specific financing review from Thorne CRE with the purchase contract, scope of work, ARV support, projected timeline, and intended exit.

A deal should remain acceptable after realistic delays and a lower exit price, not only in the best-case model.

What else do investors ask about fix-and-flip loans?

Fix-and-flip loan questions usually come back to the same issue: the cost of speed and leverage versus the investor's available cash and exit certainty. The answers below are general planning guidance, not a commitment to lend.

Are fix and flip loans worth it?

Fix-and-flip loans can be worth it when a property needs fast acquisition and rehabilitation capital, the investor has a credible exit, and the projected margin remains positive after points, interest, holding costs, and selling costs. They are less compelling when the deal only works at an optimistic ARV or a perfect timeline.

How much do you have to put down on a fix and flip loan?

The down payment on a fix-and-flip loan is deal-specific. It can include the gap between purchase price and loan proceeds, points, closing costs, reserves, and cash needed before rehabilitation draws arrive. Calculate cash at closing separately from the loan's maximum commitment so the funding gap is visible.

How much does it cost to flip a 1500 sq ft house?

The cost to flip a 1,500-square-foot house cannot be estimated reliably from square footage alone. Location, property condition, layout changes, permits, labor, materials, financing, taxes, insurance, and resale costs can change the budget substantially. Build the estimate from an itemized scope of work and add a defined contingency.

What is the interest rate on a fix and flip loan?

The interest rate on a fix-and-flip loan depends on the borrower, property, leverage, loan amount, term, exit strategy, and lender. Rate alone does not show the full cost. Add points, lender fees, interest on drawn funds, extension costs, and monthly holding costs before comparing financing proposals.

The best loan comparison is the one that shows total dollars paid, cash needed, and the exit conditions required to repay it.

What should you do before submitting a flip loan request?

Before submitting a flip loan request, replace rough estimates with a signed purchase price, itemized scope, realistic timeline, ARV support, and clear exit plan. Then compare the modeled loan structure with the cash you can actually keep available for rehabilitation gaps and delays.

For a broader view of short-term versus longer-term debt choices, see how commercial mortgages compare with bridge financing. The key question is not only whether a lender can fund the project. It is whether the project can absorb normal setbacks and still repay the loan on time.